Maytag washers are built for durability, but like any washing machine they develop issues over time, and because Maytag is made by Whirlpool, many share the same parts and error codes. If your Maytag washer won’t drain, spin, or start, this guide covers the most common problems, the error codes, and when a professional repair is the right call.
Quick answer: Common Maytag washer faults are a clogged drain pump (won’t drain), a failed lid lock (won’t start or spin), worn bearings (loud spin), and control or sensor errors. Most show an error code that points to the part, and many are same-day repairs. Michigan: (877) 589-0516.
Serving Grand Rapids & all of West Michigan
Common Maytag Washer Problems
1. Maytag Washer Won’t Drain
Standing water after a cycle usually points to a clogged drain pump filter, a kinked drain hose, or a failed drain pump. Check the hose and clean the filter first; if it’s clear and still won’t drain, the pump likely needs replacing.
2. Maytag Washer Won’t Spin
Often tied to a drain problem, but also caused by an unbalanced load, a worn drive belt or motor coupler, or a faulty lid switch. Redistribute the load and confirm it drains before suspecting internal parts.
3. Maytag Washer Won’t Start
Check power and the breaker, make sure the lid is fully latched, and disable the Control Lock (hold the button 3 seconds). If it still won’t respond, the lid latch or main control board may be at fault.
4. Maytag Washer Leaking or Making Noise
Leaks usually come from the door boot (front-load), hoses, or overfilling from using non-HE detergent. Grinding noises can signal a worn tub bearing; squealing often means the drive belt.
Common Maytag Washer Error Codes
| Code | Meaning | Likely Fix |
|---|---|---|
| F5 E3 | Door won’t lock/unlock | Inspect door lock assembly |
| F8 E1 / LF | Low flow / long fill | Check water supply & inlet valve |
| F9 E1 | Long drain | Clean pump filter / check hose |
| Sd / Sud | Excess suds detected | Use less HE detergent |
| dU | Door/lid unlocked | Ensure lid closes & latches |
DIY vs. Professional Maytag Washer Repair
Cleaning the pump filter, balancing loads, checking hoses, and switching to HE detergent are all safe DIY steps. Call a professional for anything involving the motor, control board, tub bearing, drive components, or persistent leaks, and if your washer is still under warranty, DIY repairs can void it.
How Much Does Maytag Washer Repair Cost?
Most Maytag washer repairs run $120 to $350 depending on the part. If the repair exceeds half the price of a new machine and yours is over 8 to 10 years old, replacement may be the better value.
Maytag Washer Repair in Grand Rapids & West Michigan
Our experienced local technicians service Maytag, Whirlpool, Amana, and all major washer brands with same-day and next-day appointments. Book our washing machine repair in Grand Rapids, or see our dryer repair service. We also serve Wyoming and Grandville.
Frequently Asked Questions
Are Maytag and Whirlpool washers the same?
Maytag is owned by Whirlpool, and many models share parts and error codes, so repairs and diagnostics are very similar across both brands.
Why won’t my Maytag washer drain or spin?
Most often a clogged pump filter or drain hose. Clean the filter and check the hose first; if it’s clear, the drain pump may need replacing.
What does “Sd” mean on a Maytag washer?
“Sd” (or “Sud”) means too many suds were detected. Use less high-efficiency (HE) detergent and run a rinse cycle.
Frequently asked questions
Why won’t my Maytag washer drain?
Usually a clogged drain pump or filter, or a kinked drain hose. Clear the filter and check the hose first. If water still sits in the tub, the pump needs service.
What do Maytag washer error codes mean?
Codes such as F5 (lid lock), F7 (motor), or Sd and Sud (too many suds) point to the failing part, so the technician knows exactly where to look.
Why is my Maytag washer so loud on the spin cycle?
Usually worn drum bearings or shock absorbers, or an unbalanced load. If it is loud even with a balanced load, the bearings likely need replacing.
How much does a Maytag washer repair cost?
Most Maytag washer repairs run $100 to $400 in Michigan, parts and labor, depending on the part.
Is it worth repairing a Maytag washer?
Usually yes if it is under about 10 years old, since Maytag machines are built to be opened and repaired.