Dryer Repair in Grand Rapids, MI
Most dryer repairs in Grand Rapids cost between $100 and $300 and finish in one visit. If your dryer needs two cycles to dry one load, that is restricted airflow rather than a worn out machine. It is also how dryer fires start, so it is worth dealing with this week.
- EPA 608 certified
- Price before we start
- Same-day slots
Same-day dryer repair in Grand Rapids
This is the appliance people put up with the longest, and the one where that is the worst idea. Fire departments across the country answer roughly 2,900 clothes dryer fires a year, causing about 5 deaths, 100 injuries and $35 million in property loss. Dust, fibre and lint are the leading item first ignited at 27 percent, and 83 percent of those fires start in the laundry area.
The vent runs in Grand Rapids make it worse. The Victorians in Heritage Hill were not built with dryers in mind, so the ducting often takes a long route through a crawl space with several bends. Long run, more bends, more lint, more risk.
Dryers are behind about 2,900 home fires a year, and lint is the leading cause, according to the US Fire Administration.
What is it doing?
Find your symptom. We have put the likely cause and the honest price range next to each one, so you know roughly what you are dealing with before you pick up the phone.
| Symptom | Likely cause | Typical cost |
|---|---|---|
| Two cycles to dry one load | Restricted vent. The machine cannot exhaust moist air so it runs hot and long. This is the one to act on. It is the setup that starts fires. | $120 – $250 |
| Drum turns but there is no heat | Heating element or thermal fuse on an electric dryer, igniter or flame sensor on a gas one. | $130 – $330 |
| Motor hums but the drum will not turn | Snapped drive belt or a seized idler pulley. Common and cheap. | $120 – $260 |
| Loud rumbling or squealing | Worn drum rollers or bearings. Not dangerous, but it gets worse and louder. | $140 – $300 |
| Shuts off part way through a cycle | Thermal fuse tripping because of restricted airflow. Replacing the fuse without clearing the vent just blows another fuse. | $120 – $220 |
| Burning smell | Stop. Unplug it. This is lint against a hot element and it needs looking at today, not next week. | Book today |
What it costs in Grand Rapids
Nobody else in this city publishes these. Ranges are fitted prices, parts and labour, based on 2026 national repair data and what we actually charge here. Your exact number is confirmed before any work starts.
| Job | Fitted price |
|---|---|
| Diagnostic (comes off the bill if you go ahead) | $70 – $130 |
| Vent clearing and airflow test | $120 – $250 |
| Thermal fuse | $120 – $220 |
| Heating element (electric) | $150 – $300 |
| Igniter (gas) | $150 – $330 |
| Drive belt | $120 – $260 |
| Drum rollers or bearings | $140 – $300 |
| Control board | $200 – $380 |
Repair it or replace it?
Dryers are the appliance we most often tell you to keep. They average about 12 years and almost every fault is cheap: $100 to $300 against $600 to $1,200 for a new one. A dryer is a drum, a motor, a belt and a heat source. There is not much in there worth walking away from. If someone has quoted you a new dryer for a heating fault, get a second opinion.
Estimates use 2026 national repair costs and NAHB appliance lifespan data. Your actual quote depends on brand, part and fault. We confirm the exact price before any work starts.
How the visit actually goes
1. You call
You describe what it is doing. We ask the brand, rough age and the symptom, and give you a price range on the phone. That call is free and takes two minutes.
2. Two-hour window
Not four. We book a two-hour window and we turn up inside it. If we are running late you get a call, not silence.
3. Diagnosis and price
We find the fault and tell you the number before a tool comes out. If you say no, you pay the diagnostic and we leave. No pressure.
4. Fixed, usually today
Our vans carry the parts that actually fail on the common brands, so most jobs finish on the first visit. Parts and labour warranty in writing.
Brands we service
Whirlpool, Maytag, GE, LG, Samsung, Electrolux, Frigidaire, Amana, Kenmore and Speed Queen, gas and electric. We test airflow on every dryer call, whatever the original fault, because it is the thing most likely to hurt you and it takes us two minutes.
Questions we get asked
Most dryer repairs run $100 to $300, which makes this the cheapest major appliance to fix. The diagnostic is $70 to $130 and comes off the bill if you go ahead. Vent clearing runs $120 to $250.
Restricted airflow, almost every time. Lint builds up in the duct, the machine cannot push moist air out, and it runs hot and long without drying anything. It is not the machine wearing out. It is the vent, and it is the exact condition that causes dryer fires.
Once a year for most homes. More often if you have a long duct run, several bends, or a big household. If your laundry is in a basement or a crawl space with a long route to the outside wall, which is common in the older parts of Grand Rapids, err on the side of more often.
Nearly always. Dryers average 12 years and most faults cost $100 to $300 against $600 to $1,200 for a replacement. It is rare for us to tell someone to scrap a dryer.
The thermal fuse is doing its job. It cuts power when the machine overheats, and it overheats because air cannot get out. Replacing the fuse alone is a plaster over the problem. The vent has to be cleared or you will blow the next fuse too.
Something else broken?
We cover every major appliance in the house. If it plugs in and it has stopped, start here.
Tell us the symptom. We will tell you the price.
Two minutes on the phone saves you a wasted call-out fee. If it is not worth fixing, we will say so and you will not have paid us a cent.
Mon–Fri 7am–7pm · Sat 8am–4pm
Book a dryer repair
Rather type it out? This goes to a technician, not a call centre. We come back within the hour during business hours.